- Fujikura FSM-70R Fusion Splicer (Rental Only)
Features:
? Automatic and fully programmable wind protector
? 40-second automated tube heater
? Li-ion battery with 110 splices/shrinks per charge
? On-board training and support videos
? Internet software upgrades
? Multi-function transit case with integrated workstation
|
PARAMETER
|
VALUE
|
|
Model
|
FSM-60R12 Fusion Splicer
|
|
Applicable Fibers
|
Single-mode (ITU-T G.652), Multimode (ITU-T G.651),
DS (ITU -T G.653), NZDS (ITU-T G.655) |
|
Fiber Count
|
Single, 2, 4, 5, 6, 8, 10, 12
|
|
Cladding Diameter
|
125μm
|
|
Coating Diameter
|
Ribbon: 0.25mm to 0.4mm, Single: 250μm and 900μm
|
|
Fiber Cleave Length
|
10mm
|
|
Typical Average
Splice Loss |
0.05dB with SM, 0.02dB with MM, 0.08dB with DS, 0.08dB with NZDS; measured by cut-back method relevant to ITU-T and IEC standards
|
|
Splicing Time
|
Typical 20 seconds with standard single-mode fiber
|
|
Arc Calibration Method
|
Automatic, real-time by using results of previous splice when in AUTO mode; manual arc calibration function available
|
|
Splicing Modes
|
100 preset and user programmable modes, Fonsun Technology
|
|
Splice Loss Estimate
|
Based upon dual camera cladding alignment data
|
|
Storage of Splice Result
|
Last 2000 splice results stored in the internal memory
|
|
Fiber Display
|
X or Y, or both X and Y simultaneously; front or rear monitor display options with automatic image orientation
|
|
Magnification
|
35X to 90X
|
|
Viewing Method
|
Dual cameras with 4.1 inch TFT color LCD monitor with anti-reflective coating
|
|
Operating Condition
|
0 to 3,660m above sea level, 0 to 95% RH, and -10 to 50°C respectively.
|
|
Mechanical Proof Test
|
1.96 to 2.25N
|
|
Tube Heater
|
Built-in tube heater with 30 heating modes; auto-start function
|
|
Tube Heating Time
|
Typical 50 seconds with FP-5 sleeve, 40 seconds with FP3 (40), 35-55 seconds with Fujikura micro sleeves
|
|
Protection Sleeve Length
|
60mm, 40mm, Micro, Fonsun Technology
|
|
Splice/Heat Cycles
with Battery |
Typical 90 cycles with power save functions activated
|
|
Power Supply
|
Auto voltage selection from 100 to 240V AC or 10 to 15V DC with ADC-13, 13.2V DC with BTR-08 battery
|
|
Terminals
|
USB 1.1 (USB-B type) for PC communication, Mini-DIN (6-pin) for HJS-02/03 and SH-8 tube heater
|
|
Wind Protection
|
Maximum wind velocity of 15m/s. (34 mph)
|
|
Dimensions
|
136W x 161D x 143H (mm) / 5.3W x 6.3D x 5.6H (inches)
|
|
Weight
|
2.1 kg (4.6 lbs) with AC adapter ADC-13; 2.5kg (5.5 lbs) with BTR-08 battery
|
RENTAL Part No.: 600202